faqs list

Precision Images Design Inc.

"Special Order" Bar plans

Get plans to build the bar you want!

Stylish design

Easy to build

Guaranteed accurate

Unlimited support

Heavy duty design

Straight or L shaped

FAQs Page

What should I do before I place my order?

First, measure the area where you plan to install your bar and determine what features you think would be best for your specific room layout. Choose the appropriate Configuration number for your layout and enter it in the secure online form provided. Also, enter the overall dimensions for your bar in the "D", "D1" or "D2" fields as appropriate. Enter the security code shown on the screen, and press the "Submit" button. Next, Place your order using our secure shopping cart service. We will then prepare a 3 view "scale" drawing of your bar layout for your approval. The drawing will show the overall dimensions of the bar and the locations of the extra features. If any changes need to be made, let us know and we will promptly modify the drawing and send it back to you for your final approval. When we receive your final approval, your order will be processed, and your plans will be shipped.

Where do I get the lumber to build the bar?

All lumber is specified in USA standard dimensional lumber sizes and standard 4' x 8' x 3/4" sheet sizes. This type of lumber is readily available at your local "Home Center" store.

Where do I get the hardware I'll need?

All hardware specified is generally available at your local "Home Center" store. We also provide online sources for all hardware except for nails, screws and bolts.

Before I purchase special order plans, how will I know how much my bar will cost to build?

The actual cost will depend on the size and type of layout you plan, the extra features you include, and the species of lumber you intend to use. The rule of thumb is to figure $35 per lineal foot if you use White Pine and approximately $55 per foot in Red Oak. Oak is about "middle of the road" economically speaking, so compare this to the cost of a custom built or pre-built bar.

What tools and equipment will I need?

You should have access to:

1. Table saw.

2. Circular saw for making angle cuts in the bar tops ( L shaped bars only ).

3. Jig saw ( or hand coping saw ) for arm rail end caps and cutouts when required.

4. Router. Bits should include:

a) 1/2" radius Roundover bit for trim pieces

b) 3/4" radius Roundover bit if you choose to make your own arm rail molding ( instructions and setups are included in the plans )

c) Rabbeting bit for end panels (3/8 wide x 3/8 deep)

d) Tongue and Groove bit for sink cabinet doors when used (1/4 wide x 3/8 deep)

5. Power driver/drill.

6. Gluing clamps, steel carpenter's square, tape measure.

7. Power sander for finish sanding ( recommended but not necessary )

8. 6” or 8” Dado set ( for making your own arm rail molding )

9. 10” Power miter saw for the arm rail miters ( preferred method ). This can also be done using a radial arm saw or by hand.

I am a novice when it comes to woodworking. Will I be able to build this bar?

Our special order plans are designed for the novice. As long as you know how to operate your equipment in a safe manner, you should have no problems. If you need help interpreting the information in the plans contact us and we will happy to help.

Can I put a brass foot rail around the base of the bar?

Yes! Due to the many different types and styles of foot railing, we do not provide the installation instructions in the plans. For complete information on how to determine exactly what foot rail parts you will need to order, and for detailed installation instructions please visit our website at www.precision-images.com/bar_moldings.htm. Click the “Bar Foot Rails” graphic, then look for the “Hints for Ordering” and “Easy Installation Instructions” links near the top of the page. Your bar is designed to accept all types and styles of foot railing offered by this distributor.

What if I have questions after I buy?

Just send us an email through the link below. Your questions will be answered promptly. We provide unlimited support by email for the duration of your project!

TomK@Precision-images.com

Back to order page

Precision Images Design Inc.